Under Related settings, select Additional power settings. The Status window shows an active connection to the network and the internet.įrom the left menu, select Power & sleep. In the Selected Component window, drag the other connector to the Ethernet port on the wall outlet.Ĭonfirm that the computer is connected to the local network and the internet as follows:Ĭlick the power button on the computer case to turn the computer on.Īfter the operating system loads, right-click the Network icon and select Open Network & Internet settings. In the Selected Component window, drag a connector to the NIC port on the 1000BaseTX network adapter.
#Testout pc pro 6.11.7 lab free#
Verify that the Support workstation can communicate with the internet using the new NICĭrag the 1000BaseTX network adapter to a free PCIe slot on the computer.Ĭonnect the computer to the network as follows:Ībove the computer, select Back to switch to the back view of the computer.
#Testout pc pro 6.11.7 lab install#
Install the 1000BaseTX network adapter in the Support workstationĬonnect the new NIC to the network using a Cat6a cable When the BIOS loading window appears, press F2 to enter the BIOS. On the computer, select the power button on the front of the computer. Repeat steps 2b-2c until all memory slots in the computer are filled with good modules.īoot into the BIOS and verify that all installed modules are recognized by the BIOS as follows:Ībove the computer, select Front to switch to the front view of the computer. If the memory tester indicates OK, the module is good drag the module to the computer. If the memory tester indicates BAD or ERROR, the module is bad return the module to the Shelf. Test and install the memory modules on the Shelf as follows:ĭrag a memory module from the Shelf to the correct slot on the memory tester. Repeat steps 1d-1e for all memory modules in the computer. If the memory tester indicates OK, the module is good. If the memory tester indicates BAD or ERROR, the module is bad. Test the memory modules in the computer as follows:Ībove the computer, select Motherboard to switch to the motherboard view of the computer.ĭrag the Memory Tester from the Shelf to the Workspace.ĭrag a memory module from the computer to the correct slot on the memory tester.
0 kommentar(er)
